Equipment; Progressive Die Presses, Deep Draw Presses and More.

Progressive Die Presses

Large Progressive Strip from toolclick to enlarge
  • 1 – Minster E2H 450 120-55 Straight side with servo roll feed, straightener and double coil reel 450 ton (Max. mat’l cap. – .250 thk x 32″ wide)
  • 1 – Minster E2 300 96-48 Straight side with servo roll feed, straightener and double coil reel 300 ton (Max. mat’l cap. – .250 thk x 32″ wide)
  • 1 – Minster E2 250 72-42 Straight side with .200 thk x 18″ wide servo roll feed – 250 ton
  • 1 – Minster E2 200 42-36 Straight side with 18″ wide servo roll feed – 200 ton
  • 1 – Minster P2H-160 63-36 Straight Side with .187 thick x 14″ wide servo roll feed – 180 ton
  • Coil handling & feeding equipment up to .250 thick, 11,000 lb. capacity

Deep Draw Presses

Deep draw metal stamped cylindersclick to enlarge
  • 5 – Bliss 85-1/2 Straight side with air cushions – 90 ton – 12-16″ stroke
  • 1 – Clearing F-1200 Straight side – 200 ton – 26″ stroke
  • 1 – Verson Inclined Gap Frame blank & draw with 20 x 20 feed – 250 ton – 14″ stroke
  • 1 – Hydraulico Triple action Straight side Hydraulic – 165 x 110 x 80 ton – 39″ stroke
  • 1 – Greenerd 4 post Hydraulic with automated parts transfer and air cushion – 50 ton – 30″ stroke
  • 5 – Automatic Deep Draw Hydraulic Press Lines with capacities to 8″ in diameter and 22″ in length. Features include Double Action Presses, Transfer Systems, and Aqueous Washing.

Blanking & Secondary Presses

Secondary Operationsclick to enlarge

Straight side & O.B.I. presses from 22 to 150 ton capacity including:

  • 2 – Rousselle 4E 6E O.B.I. – 60 ton
  • 1 – Bliss CH-75 O.B.I. with 8″ wide servo roll feed – 75 ton
  • 1 – Lauffer RPT 110 Hydraulic with 12 x 12 air feed & hydraulic cushions – 110 ton
  • 1 – Toledo #665 straight side swaging press – 800 ton
  • 1 – Niagra 100 36-30 Straight side – 100 Tons
  • 1 – Rhodes OBG – 200 Ton
  • 1 – Perkins Model 9H Straight Side – 75 Tons
  • 1 – Nidec Minster CX1-800 – 88 Tons

All presses are equipped with OSHA approved operator safety devices,

 

Rolling hearth and brazing furnace with deep drawn cansclick to enlarge

Heat Treat & Assembly

  • 2 – Nelson & Jacobs 4 gun spot welder 75 KVA
  • 2 – Pemserter fastener insertion presses
  • 1 – G.E. 500 KW roller hearth brazing 26″ x 26″ opening furnace with exothermic atmosphere
  • 1 – Bancroft Model 300 Welda-Round

 

Cleaning & Finishing

  • 1 – Almco round vibratory finisher 15 cu. ft.
  • 1 – Rosemont round vibratory corn cob 15 cu. ft. dryer
  • 3 – Conveyorized hot water spray 12″ x 24″ wash cabinets opening
  • 1 – In-line rotary drum washer
  • 1 – Giant GB-20 vibratory finishing machine
  • 2 – Combo Roto Finish/Drying Tumbling Systems (One is coupled to Minster Presses)

We maintain a solvent-free cleaning environment. All cleaning is done with environmentally-friendly aqueous solutions.

 

Quality Control Process Minatoya Quick Scope Vision Measuring Machineclick to enlarge

Quality Assurance

Full SPC capabilities, monitored in real time using mitutoyo Measurelinke data collection & control equipment, with a calibration program for all inspection equipment per ISO/TS 16949.

  • 1 – 14″ Mitutoyo Optical Comparitor with DRO
  • 2 – Rockwell hardness tester
  • 1 – Browne & Sharpe Micro-Hite 350
  • 1 – Mitutoyo Quickscope

 

CAD Stationclick to enlarge

Engineering

Five person engineering and design staff working on networked CAD. 80 years collective experience in design of complex progressive, deep draw, and compound tooling. Fully capable in mechanical, pneumatic, and hydraulic automation, PLC & servo technology, and specialized machine design.

 

 

Tool Room

12 person staff with full die making, try-out, and maintenance capabilities. Complete tool making facilities:

Larson Tool Room with new tool assemblyclick to enlarge
  • 2 – Harrison M300 13″ swing Lathe
  • 2 – Reed-Prentiss 16″ swing Lathes
  • 1 – Harrison M500 28″ swing gap bed Lathe
  • 2 – Bridgeport Series I milling machines
  • 1 – Carlton 3A radial drill press – 13″ column x 48″ throat
  • 1 – 30″ table Blanchard Grinder
  • 8 – Surface Grinders from 6 x 12 to 16 x 32 capacity
  • 1 – Moore B3 Jig Borer
  • 1 – Moore G3 Jig Grinder
  • 1 – Mitsubishi FX-20 Submerged cut Wire E.D. M. 14 x 20 x 12 cap.
  • 1 – Chamilles 440 CCS Submerged WEDM 14 x 21 1/2 x 15
  • 1 – Mazak 200B Vertical Machining Center 44 x 20 20
  • 1 – Mazak QTS 350M CNC Lathe 16″ Swing

Are We A Match? »

  • Is this an engineered product?
  • Is this for a 75-450 press?
  • Does it fit our material specs?

Sign Up For Our Newsletter »

Stay informed of new capabilities and how they can help your company.

Tour Our Facility »

Take a look around where we produce our high quality, cost-effective solutions.

Video Tour & Info »

See for yourself why Larson Tool Company should be your partner in manufacturing.

Get a Quote »

Send us your design and production challenges, and we'll get back to you with a quote.

Download Our Stamping Design Guide »

Learn how to optimize your part design for the metal stamping process with this PDF file.

Contact us »

For more information about any of our capabilities and services, please contact us.